Vintage Honda CB160 roadrace pegs RS-CB160 $235.00

· Note that the brake cable is dealt with, there is no longer a need to cut and weld on the frame. 

· A brake stop to keep the lever from flopping about. 

· There is some up-down peg adjustablility.

· Comes with shift linkage that supports normal or GP shift.

· Primarily designed for racing - Requires some mods to stock exhaust, will interfere with kickstarter.

Please See the instructions before ordering

Vintage Honda CB175 roadrace pegs RS-CB175 $220.00

· Brake linkage provided, with a brake stop to keep the lever from flopping about. 

· There is some up-down and front-back peg adjustablility.

· Comes with shift linkage that supports normal or GP shift.

· Primarily designed for racing - Requires some mods to stock exhaust, will interfere with kickstarter.

· Not for the “sloper”.

· The brake link was designed to be light and get you thru tech inspection. It is not as powerful as the stock linkage.

The brake link has been improved, it is mostly 3/8” aluminum hex, and has very little flex.

Requires some minor cutting and drilling, please See the instructions before ordering.

Vintage Honda CB350 roadrace pegs RS-CB350 $240.00

· Brake linkage provided, with a brake stop to keep the lever from flopping about. 

· There is some up-down and front-back peg adjustablility.

· Comes with shift linkage that supports normal or GP shift.

· Lowest position is just below stock passenger peg, highest is just above it. Another pair of settings 23mm forward to help get some front end weight.

· Primarily designed for racing – Works with kickstarter, but take a close look at the instructions to make sure it will work with your exhaust.

· CL kickstarter will not work, does not swing out as far as the CB.

· The brake link was designed to be light and get you thru tech inspection. It is not as powerful as the stock linkage.

The brake link has been improved, it is mostly 3/8” aluminum hex, and has very little flex.

Please See the instructions before ordering

Vintage Yamaha XS650 roadrace pegs RS-XS650 $240.00

· Brake linkage provided, connects to stock brake lever. Requires simple cutting of the brake lever.

· Comes with shift linkage and shift-shaft arm that supports normal or GP shift.

· Four positions, in relation to swingarm pivot:

1. 15mm up, 90mm back

2. 15mm up, 110mm back

3. 35mm up, 75mm back

4. 40mm up, 95mm back

· Works with stock exhaust. Please look at photos carefully to see if it will work with yours.

· Stock kickstarter lever will not work without modification.

Please See the instructions before ordering

Replacement parts:
Replacement lever (complete with toepiece)	RS-Lev	$ 54.98
footpeg	RS-Peg	$ 16.45
Mount plate	RS-MP-XXX	$ 54.90
Heel plate	RS-Heel	$ 49.50
Shift linkage rod	RS-link-XXX	$ 28.55
Brake linkage pull-rod	RS-BrakeLink	$ 18.00
Toepiece (pair)	RS-toe	$ 16.50

Questions? Orders? Email me.